Preferred headphones store
Reviewed on Sep 26, 2016 , Marc Henney, Jean-Christophe Lamontagne

SoundPeats Q9A / Q9 Wireless Sports Earphones
HEADPHONES REVIEW

Usage Ratings - Version 1.2

Test Benches: test

  • 1.2: Winter 2018
  • 1.1: Summer 2017
  • 1.0: Winter 2017
  • 0.9: Winter 2016
6.5
Mixed Usage
What it is This is the combination of the different use cases to evaluate how versatile the headphones are. Therefore an everyday headphone should be well-rounded enough to adapt to most situations and environments without significant losses in sound quality, design ergonomics or isolation.
Score components:
6.4
Critical Listening
What it is The level of audio fidelity a headphone can reproduce. Therefore a balanced and true representation of bass, mids, treble, soundstage and imaging, as well as a comfortable listening experience, is essential for critical listening.
Score components:
6.6
Commute/Travel
What it is How well the headphones handle the loud environments involved in commuting or traveling. Therefore your listening experience should be comfortable, hassle-free and as isolated from noise as possible.
Score components:
7.6
Sports/Fitness
What it is How well-adapted the headphones are, to use while doing sports or strenuous exercise. Therefore the headphones should not be too cumbersome and deliver a stable and comfortable listening experience.
Score components:
6.6
Office
What it is How well the headphones can deliver a comfortable and isolated listening experience in an office-like environment. They should not leak much and should block the noise of a busy office.
Score components:
5.4
Home Theater
Score components:
5.2
Gaming
Score components:
Type : In-ear
Enclosure : Closed-Back
Wireless : Yes
Noise-Cancelling : No
Mic : Yes
Transducer : Dynamic

The SoundPeats Q9A are better built and have more convenient audio controls than the QY8 and QY9. They're wireless, stable and a bit more comfortable than typical in-ear models. Unfortunately, they don't block much noise, and their sound quality is sub-par, which could be a deal breaker for some.

Test Results
Design 7.3
Sound 6.3
Isolation 7.1
Microphone 5.9
Active Features 4.9
Connectivity 3.5
Pros
  • Stable and portable design.
  • Comfortable fit.
  • Very low leakage.
Cons
  • Poor noise isolation.
  • Exceedingly bass-heavy sound.
Update 2/16/2018: Converted to Test Bench 1.2.
Update 10/2/2017: The microphone has been tested with our new methodology, as explained here
Update 8/10/2017: Converted to Test Bench 1.1. Learn more about our new versioned test bench system here.

Check Price

7.3

Design

Score components:
SoundPeats Q9A Design Picture

The Q9A are decent looking sports-oriented headphones. They have a sleek wireless, and understated design that's better than that of the QY9 and the QY8 for stability, comfort and button layout. They also have a moderately sturdy build that's compact and hassle-free to carry around on your person. Unfortunately, they have a low manufacturing tolerance making some of the units defective and less durable than others.

Style
SoundPeats Q9A Design Picture 2

The Q9A have a sporty aesthetic with thick flexible ear hooks and a wireless design. They do not feel as premium as the Anker Soundcore Spirit X. The earbuds are not much larger than typical in-ears but have a different build and format than the QY8 and QY9 models of the same brand. They're stylish and resemble the much higher priced Powerbeats, however, the finish and button placement is not as good.

7.0 Comfort
What it is: Adjustability and degrees of freedom, pressure, stiffness and weight.
When it matters: When the headphones are going to be used for long durations.
Score components: Subjectively assigned
SoundPeats Q9A Comfort Picture
Weight : 0.05 lbs
Clamping Force
What it is: The force that the headphones exert on your head, once you have them on. This is purely a measurement of the force applied, which does not take into account the earpad's surface area and the resulting pressure you will feel, on or around your ears.
When it matters: The tighter the headphones, the more force they put on your head. This can get uncomfortable or cause pain and soreness during long listening sessions.
:
0 lbs

The Q9A are above-average comfortable for an in-ear design. The tips do not fit into the ear canal as deeply as typical in-ear models. This removes a bit of the soreness and pain some listeners experience during long listening sessions. However, they're not ideal for everyone. Although stable, the rubber tips sometimes slide a bit in the ear canal, which can be slightly distracting and uncomfortable.

6.7 Controls
What it is: The control scheme of the headphones, the number of functions provided, button layout and ergonomics as well as the quality of tactile feedback.
When it matters: If you want to control volume, pause your music or make phone calls without directly interacting with your audio device.
SoundPeats Q9A Controls Picture
Ease of use : Mediocre
Feedback : Mediocre
Call/Music Control : Yes
Volume Control : Yes
Microphone Control : No
Channel Mixing
What it is: Being able to mix audio channels directly on the headphones.
When it matters: This is most useful when using a separate chat software so that you can mix in-game audio and chat audio depending on your needs.
:
N/A
Noise Canceling Control : N/A
Talk-Through : N/A
Additional Buttons : No

The Q9A have a better control scheme and button layout than the QY9 and QY8. They also deliver better tactile feedback, provide call/music, track skipping, and volume controls. However, the buttons are very small and cramped on the right ear bud which is a bit impractical for listeners with larger fingers.

8.8 Breathability
What it is: How hot the headphones get when you wear them for an extended period of time.
When it matters: If you often have long listening sessions or use your headphones while doing physical activities like running or working out.
Score components:
SoundPeats Q9A Breathability After Picture
Avg.Temp.Difference : 1.2 C
8.2 Portability
What it is: The volume of space occupied by the headphones when folded into their most compact format.
When it matters: If you're often on the move and need to carry your headphones in a bag, purse , or pocket.
Score components:
SoundPeats Q9A Portability Picture
L : 2.25 "
W : 3.63 "
H : 1.13 "
Volume : 9.23 Cu. Inches
Stand required : N/A

The Q9A are easy to carry around in a pocket, bag, or purse. They only take a small amount of space, and they're lightweight, making them very portable headphones. They're slightly larger than basic and straightforward in-ear designs, but they will rarely be a hassle to carry on your person.

7.0 Case
What it is: The provided carrying options to protect your headphones when transporting them.
When it matters: To prevent damaging your headphones, if you often carry them in your bag or pocket.
Score components: Subjectively assigned
SoundPeats Q9A Case Picture
Type : Soft case
L : 3.4 "
W : 3.4 "
H : 1.8 "
Volume : 21.5 Cu. Inches

Comes with a decent soft case that will protect the headphones against minor damage, scratches, and falls. However, it's still a soft case, and it will bend and compress under enough force.

6.5 Build Quality
What it is: Durability, material quality, cheap/expensive feel.
When it matters: When the headphones are going to be used by multiple users (classes/studios), by children, in tough conditions, on a daily basis, or for exercise.
Score components: Subjectively assigned
SoundPeats Q9A Build Quality Picture

The build quality of these headphones is above-average. The Q9A have a flat and rubberized cable and sufficiently dense ear buds to handle few drops without damage. The ear-hooks are also thick and relatively sturdy making them better built than some cheaper sports-oriented headphones we've reviewed. However, the manufacturing tolerance is not the best. Some listeners have experienced weak cables that break relatively quickly. This does not occur on every unit, but should be taken into consideration when purchasing these headphones.

8.0 Stability
What it is: How the headphones are designed to prevent them from slipping off your ears or falling off your head.
When it matters: If you plan on using the headphones while doing sports or other physical activities that requires a lot of movement.
Score components: Subjectively assigned
SoundPeats Q9A Stability Picture

These headphones have a stable ear-hook design that's great for sports. They won't easily fall off your ears even during intense workout sessions. Unfortunately, the ear bud tips are a bit slippery, so while the headphones won't fall off your ears, the ear buds may slide out of your ear canal when running, which is slightly frustrating.

Cable
Detachable : No
Length : N/A
Connection : N/A
Top
Headshots 1
Headshots 2
6.3

Sound

What it is: How accurately the audio is reproduced. The tests are performed with the headphones' most commonly used features enabled (noise-cancelling, wireless, etc.)
SoundPeats Q9A Frequency Response

The SoundPeats Q9A are a below-average sounding pair of closed-back in-ear headphones. The have an average but extended bass, a good mid-range and an average treble. Additionally, their bass tends to sound boomy and muddy, their mid-range is slightly recessed, and their treble lacks a bit of detail. Also, they perform consistently across multiple users, but don't have an open and spacious soundstage.

6.9 Bass
What it is: Frequency Response from 20Hz-250Hz
When it matters: When the material is heavy on bass frequencies, such as those of kick drums and bass guitar.
Score components:
SoundPeats Q9A Bass
Std. Err.
What it is: The amount of deviation (weighted standard error) in bass frequency response (20Hz-250Hz) as compared to a target response that would sound perfectly balanced to most people.
When it matters: When a balanced and neutral (reference) bass performance is desired.
Good value: <4dB
Noticeable difference: 0.1dB
:
4.53 dB
Low-Frequency Extension
What it is: The lowest frequency at which the frequency response reaches -3dB of the target response.
When it matters: Shows how extended the bass is.
Good value: <40Hz
Noticeable difference: 5Hz
:
10 Hz
Low-Bass
What it is: The average amount of over/under-emphasis in frequency response from 20Hz-60Hz.
When it matters: Kick drums and low frequency effects get their 'thump' from this range. Mostly felt than heard.
Good value: +/-3dB
Noticeable difference: 0.1dB
:
3.61 dB
Mid-Bass
What it is: The average amount of over/under-emphasis in frequency response from 60Hz-120Hz.
When it matters: Melodic bass instruments have most of their fundamental frequencies in this range. This is where the 'body' and 'punch' of the bass sits.
Good value: +/-3dB
Noticeable difference: 0.1dB
:
4.22 dB
High-Bass
What it is: The average amount of over/under-emphasis in frequency response from 120Hz-250Hz.
When it matters: Most instruments get their warmth and full-ness from this range. When over-emphasized, mixes tend to get muddy and boomy.
Good value: +/-3dB
Noticeable difference: 0.1dB
:
6.57 dB
7.7 Mid
What it is: Frequency Response from 250Hz-2KHz
When it matters: When the material is heavy on mid-range frequencies. This is the case for the majority of audio content.
Score components:
SoundPeats Q9A Mid
Std. Err.
What it is: The amount of deviation (weighted standard error) in mid frequency response (250Hz-2.5KHz) as compared to a target response that would sound perfectly balanced to most people.
When it matters: When a balanced and neutral (reference) mid performance is desired.
Good value: <4dB
Noticeable difference: 0.1dB
:
3.08 dB
Low-Mid
What it is: The average amount of over/under-emphasis in frequency response from 250Hz-500Hz.
When it matters: Most instruments have their fundamentals or low harmonics in this range. Over-emphasis in this range sounds muddy and cluttered. Under-emphasis, thins out the vocals and lead instruments.
Good value: +/-3dB
Noticeable difference: 0.1dB
:
3.51 dB
Mid-Mid
What it is: The average amount of over/under-emphasis in frequency response from 500Hz-1KHz.
When it matters: This range is occupied mostly by upper harmonics. Over-emphasis sounds forward and boxy. Under-emphasis pushes instruments to the back of the mix.
Good value: +/-3dB
Noticeable difference: 0.1dB
:
-2.23 dB
High-Mid
What it is: The average amount of over/under-emphasis in frequency response from 1KHz-2KHz.
When it matters: Most instruments, especially vocals, get their intensity and clarity from this range. Over-emphasis sounds honky and harsh, under-emphasis sounds weak and distant.
Good value: +/-3dB
Noticeable difference: 0.1dB
:
-0.23 dB
6.7 Treble
What it is: Frequency Response from 2KHz-20KHz
When it matters: When the material is heavy on high-range frequencies, such as voice, cymbals, and any other material where brightness, brilliance and airiness is desired.
Score components:
SoundPeats Q9A Treble
Std. Err.
What it is: The amount of deviation (weighted standard error) in treble frequency response (2.5KHz-20KHz) as compared to a target response that would sound perfectly balanced to most people.
When it matters: When a balanced and neutral (reference) treble performance is desired.
Good value: <4dB
Noticeable difference: 0.1dB
:
4.56 dB
Low-Treble
What it is: The average amount of over/under-emphasis in frequency response from 2KHz-5KHz.
When it matters: Almost all instruments rely on this range for their presence, detail, and articulation. Over-emphasis can sound harsh and painful. Under-emphasis hurts the comprehensibility of vocals and lead instruments.
Good value: +/-3dB
Noticeable difference: 0.1dB
:
-3.32 dB
Mid-Treble
What it is: The average amount of over/under emphasis in frequency response from 5KHz-10KHz.
When it matters: This is the sibilance range. Cymbals, vocals, and lead instruments rely on this range for brightness and presence. Over-emphasis sounds piercing and painful, under-emphasis sounds dull and lispy.
Good value: +/-3dB
Noticeable difference: 0.1dB
:
-2.27 dB
High-Treble
What it is: The average amount of over/under-emphasis in frequency response from 10KHz-20KHz.
When it matters: This range gives brilliance and airiness to the sound. Over-emphasis sounds hissy, under-emphasis sounds closed-up and lifeless.
Good value: +/-3dB
Noticeable difference: 0.1dB
:
-11.22 dB
Raw Frequency Response
What it is: The average uncompensated frequency response of the headphone. For in-ears and earbuds, this corresponds to the average of 5 measurements/re-seats on the dummy head (HMS). For over/on-ear headphones, this corresponds to the average of 5 measurements/re-seats on the HMS (Head Measurement System) for the mid and treble ranges, and 5 measurements/re-seats on 5 human subjects for the bass range.
When it matters: This is for those who want to see the raw and uncompensated frequency response of the headphone. Some of the more advanced users, are able to read and evaluate headphone frequency response in its raw form and without compensation. This will be especially useful to them if they have their own headphone compensation/target curve, which may differ from the compensation curve/target response used by RTINGS.com.
Score components:
9.7 Frequency Response Consistency
What it is: The amount of deviation of each frequency response pass, from the average frequency response.
When it matters: Shows how consistently the headphones perform after re-positioning them.
Score components:
SoundPeats Q9A Consistency L SoundPeats Q9A Consistency R
Avg. Std. Deviation
What it is: The average amount of deviation in frequency response of 5 re-seats, from the average frequency response.
When it matters: Shows how consistently the headphones perform after re-positioning them.
Good value: <0.5
Noticeable difference: 0.1
:
0.06 dB
8.6 Imaging
What it is: Imaging qualities are inherent to the audio content, the headphones have to 'reproduce' them rather than 'create' them. They determine how accurately the objects are positioned in the stereo image, and how transparent the imaging is.
When it matters: When accurate positioning of the objects in the stereo image, and clear and transparent imaging is desired.
SoundPeats Q9A Group Delay SoundPeats Q9A Phase Response
Weighted Group Delay
What it is: The average amount of group delay calculated based on a perceptual weighting filter. Group delay indicates how long it takes for each frequency to reach their maximum amplitude. This is a monaural quality and can be perceived even with one ear.
When it matters: Headphones with lower group delay have more transparent imaging and a tighter bass. Headphones with higher group delay in the bass range tend to have a wimpy and loose bass, and headphones with higher group delay in the treble range tend to have a less transparent imaging.
Good value: <0.5
Noticeable difference: 0.1
:
0.1
Weighted Amplitude Mismatch
What it is: The Left/Right balance of our test unit, that is, the amount of amplitude difference between the left and right drivers. This is not a design test, but a marker for manufacturing tolerance and ergonomics.
When it matters: When a properly balanced stereo image and low manufacturing tolerance is desired. A poor score indicates a noticeable difference in level between the left and right drivers.
Good value: <1.5
Noticeable difference: 0.1
:
1.44
Weighted Frequency Mismatch
What it is: The amount of difference (Std. Err.) between the frequency response of the left and right drivers of our test unit. This is not a design test, but a marker for manufacturing tolerance and ergonomics.
When it matters: When an even and stable stereo image, as well as a low manufacturing tolerance, is desired. A poor score indicates there may be 'holes' in the stereo image at certain frequencies.
Good value: <2
Noticeable difference: 0.1
:
1.47
Weighted Phase Mismatch
What it is: The amount of difference (Std. Err.) between the phase response of the left and right drivers of our test unit. This is not a design test, but a marker for manufacturing tolerance and ergonomics.
When it matters: When an even and stable stereo image, as well as a low manufacturing tolerance is desired. A poor score indicates there may be inaccuracies in the stereo image reproduction at certain frequencies.
Good value: <16
Noticeable difference: 3
:
2.31
1.4 Soundstage
What it is: Soundstage qualities are not inherent to the audio content, the headphones have to 'create' them rather than 'reproduce' them. They determine whether the sound is perceived to be coming from inside or in front of the head, how open and spacious the soundstage is, how much the headphones acoustically interact with the environment, and how strong the phantom center is.
When it matters: When an accurately produced, large and spacious soundstage, similar to that of a stereo loudspeaker setup is desired.
PRTF Accuracy (Std. Dev.)
What it is: The standard deviation of the PRTF (Pinna-related transfer function) of the headphones compared to a reference loudspeaker's PRTF at 30°. This quality is monaural and can be perceived even with one ear. This test does not apply to in-ears and earbuds, due to the lack of pinna interaction.
When it matters: An accurate pinna activation is mainly responsible for how natural and speaker-like the soundstage is perceived to be. The less error in the shape of the PRTF, the more natrual and speaker-like the perception of the soundstage will be. High amounts of error may indicate a soundstage that is unnatural or odd.
Good value: <2.5
Noticeable difference: 0.1
:
N/A
PRTF Size (Avg.)
What it is: The average amplitude of the PRTF (Pinna-related transfer function) of the headphones compared to that of a reference loudspeaker's PRTF at 30°. This quality is monaural and can be perceived even with one ear. This test does not apply to in-ears and earbuds, due to the lack of pinna interaction.
When it matters: This value is responsible for the perceived size of the soundstage. The higher the value, the larger the perceived size of the soundstage. However, values above the reference (5.0dB) could result in a soundstage that is perceived as unnatural or odd.
Good value: >3.7
Noticeable difference: 0.1
:
N/A
PRTF Distance
What it is: The depth of the "10KHz notch" of the headphone's PRTF, which is caused by phase cancellations at the concha. This quality is monaural and can be perceived even with one ear. This test does not apply to in-ears and earbuds, due to the lack of pinna interaction.
When it matters: This value is mainly responsible for the perceived distance and elevation of the soundstage. A small distance value may result in a soundstage that is perceived to be located inside the head. Larger values may help pull the soundstage out from inside of the head and bring it to the front.
Good value: >13
Noticeable difference: 1
:
N/A
Openness
What it is: How open the headphones are, and how open and spacious they sound. This quality is monaural and can be perceived even with one ear. This test differentiates between acoustically and electronically produced crosstalk and only takes the acoustically generated crosstalk into account. This value is the inverse of the Noise Isolation test score, and could be indirectly related the acoustic impedance of the headphones.
When it matters: When a headphone with a sense of an open, and spacious soundstage is desired. A value of 10 indicates a fully open headphone, and a value of 0 indicates a fully closed headphone.
Good value: >7.5
Noticeable difference: 0.5
:
4.1
Acoustic Space Excitation
What it is: How loud the headphones are, and how much they excite their environment acoustically. If the headphones are loud and open enough, the sound leaking from the headphones will be affected by the environment (reflections/reverb) before reflecting back into the open headphones and to the listener's ears. This quality is monaural and can be perceived even with one ear. This value is the inverse of the Leakage test score.
When it matters: Headphones with higher excitation values, similar to openness, tend to have soundstages that are perceived as more open and spacious.
Good value: >7.5
Noticeable difference: 0.5
:
0.5
Correlated Crosstalk
What it is: How strong and solid the phantom center is. This is mostly a stereo quality and its effects on mono content are minimal. This test is sensitive to the phase of the crosstalk and whether it is produced acoustically or electronically.
When it matters: When a true reproduction of the stereo image is desired. A value of 0 indicates no crosstalk, or that the existing crosstalk is not correlated enough to affect the phantom center. A negative score means the crosstalk is out of phase with the original signal, resulting in a slightly wider stereo image at the expense of creating a 'hole' at the center of the stereo field. A positive score means the crosstalk is in phase and positively affecting the phantom center.
Good value: >1dB
Noticeable difference: 0.3dB
:
0.01 dB
8.0 Total Harmonic Distortion
What it is: The subtle, unwanted frequencies (harmonics) produced alongside the intended frequencies.
When it matters: When clean and pure sound reproduction is desired, though its effect is not as noticable as frequency response.
Score components:
SoundPeats Q9A Distortion
Weighted THD @ 90
What it is: The overall amount of harmonic distortion measured at 90dB SPL. To make the score more perceptually relevant, more weight is given to the higher frequencies.
When it matters: How pure the sound is at moderate listening levels.
Good value: <0.100
Noticeable difference: 0.1
:
0.904
Weighted THD @ 100
What it is: The overall amount of harmonic distortion measured at 100dB SPL. To make the score more perceptually relevant, more weight is given to the higher frequencies.
When it matters: How pure the sound is at loud listening levels.
Good value: <0.300
Noticeable difference: 0.1
:
1.009
7.1

Isolation

Score components:

The Q9A are only passively isolating headphones. Unfortunately, their in-ear fit does not go in as deeply, into the ear canal, as some of the other in-ear models, which lets ambient noise seep into your audio. They're not ideal in loud, noisy environments but their incredibly low leakage means you can blast your audio at loud enough volumes to mask a decent amount of noise without distracting anyone around you.

5.9 Noise Isolation
What it is: How much outside noise is blocked out by putting the headphones on.
When it matters: If the headphones are going to be used in a noisy envinronment (airplane, subway, etc.)
Score components:
SoundPeats Q9A Noise Isolation
Isolation Audio
What it is: The simulated noise isolation of the headphones, demonstrating how much outside noise is blocked out by putting the headphones on. This recording is created using an EQ and is not an actual recording. For headphones with ANC (active noise cancellation), the playback simulates the isolation with ANC enabled.
When it matters: When the headphones are going to be used in a noisy envinronment (airplane, subway, etc.)
:
Overall Attenuation
What it is: The overall amount of environmental noise reduction in dB.
When it matters: In loud envinronments like planes, trains, offices, etc.
Good value: <-20dB
Noticeable difference: 1dB
:
-14.03 dB
Bass
What it is: The overall amount of noise isolation in the bass range (20Hz-250Hz).
When it matters: When the outside noise is bass-heavy, like in airplanes.
Good value: <-15dB
Noticeable difference: 1dB
:
-1.9 dB
Mid
What it is: The overall amount of noise isolation in the mid-range (250Hz-2.5KHz).
When it matters: When the environment's noise is mid-heavy, like in an office.
Good value: <-15dB
Noticeable difference: 1dB
:
-11.59 dB
Treble
What it is: The overall amount of noise isolation in the treble range (2.5KHz-20KHz).
When it matters: When the environment's noise is treble-heavy. Although uncommon, areas with sharp sounds fall under this category.
Good value: <-30dB
Noticeable difference: 1dB
:
-29.43 dB
Self-Noise
What it is: The amount of noise created by the active electronics of the headphones (if applicable), measured from 300Hz-20KHz. Applies mostly to wireless and noise-cancelling headphones.
When it matters: If too loud, it could become distracting when listening to quiet material like podcasts and audiobooks.
Good value: <16dB
Noticeable difference: 1dB
:
15.73 dB

Poor isolation. Similar to the QY9. there is little to no isolation present in the Bass Range, and the isolation provided in the Mid Range is just above average. However, there is more than 30dB of isolation provided in the Treble Range which is good.

9.5 Leakage
What it is: The amount of sound bleeding out of the headphones.
When it matters: When the listener doesn't want people around them (in office, recording studio, etc.) to hear what is being listened to.
Score components:
SoundPeats Q9A Leakage
Leakage Audio
What it is: The simulated sound leakage heard 1 foot away from the user, while the user is listening to a 100dB SPL signal. This recording is created using an EQ and is not an actual recording.
When it matters: When you don't want people hear what you are listening to.
:
Overall Leakage @ 1ft
What it is: The amount of sound leakage heard 1 foot away from the user, while the user is listening to a 100dB SPL signal.
When it matters: When you don't want people hear what you are listening to.
Good value: <35dB
Noticeable difference: 1dB
:
24.07 dB

Excellent Leakage performance. The overall level of leakage is quite low, which is excepted of closed-back in-ear headphones. The significant portion of the leakage is quite narrow too, limited between 3KHz-7KHz.

5.9

Microphone

What it is: The microphone section shows the quality of speech capture and transmission by the mic, as well as how well the microphone under test handles noisy environments.
When it matters: For your speech to be transmitted to and understood properly by the listener, the microphone needs to have a good recording quality. If the environment the microphone is being used in is noisy, a microphone with a good noise handling performance would be needed as well.
Score components:
Integrated
What it is: The microphone integrated in the ear cup or ear bud of a wireless headphone.
When it matters: For calls, gaming and voice over IP software or for any other use of the microphone.
Good value: Yes
:
Yes
In-line
What it is: The microphone inside the in-line remote of audio cables for wired and wireless headsets.
When it matters: In-line microphone are usually better than integrated mics. If you need better recording quality and noise handling for calls, gaming and voice over IP software then use the audio cable of your wired or wireless headphone if it has an inline microphone.
Good value: Yes
:
No
Boom
What it is: A typically better microphone, that's also adjustable and extends so that the mic is closer to your mouth.
When it matters: Much better recording quality and noise handling than in-line or integrated mics. Primarily used for gaming and voice over IP software.
Good value: Yes
:
No
Detachable Boom
What it is: A boom mic that is detachable from the headset.
When it matters: If you want to use your headphone outdoors without the bulk and hassle of the Boom mic.
:
N/A
5.8 Recording Quality
What it is: Microphone recording quality shows how natural, neutral, extended and intelligible speech would be with the device under test, in a quiet environment.
When it matters: A microphone with a good recording quality ensures that the person listening to you would hear a full, clear, and easily understandable speech. Therefore, it is important whenever a good quality of speech transmission and intelligibility is needed.
Score components:
SoundPeats Q9A Microphone Frequency Response
Recorded Speech
What it is: Actual audio recording of the headphone's microphone, recorded while placed on the dummy head, with speech being played back through the dummy head's mouth simulator.
When it matters: When a clean, full, and intelligible speech transmission is required.
:
LFE
What it is: Low-frequency extension shows how deep the bass response of the microphone is, and therefore, how deep and full your voice would sound to the listener. It is the lowest frequency at which the frequency response reaches -3dB of the target response.
When it matters: LFE is not a big factor in speech intelligibility and even speech recorded with a mic that has an LFE of 500Hz could still be easily understood. Therefore, it is mostly important if you are concerned with how deep and full your voice would be heard.
Good value: <150Hz
Noticeable difference: 30Hz
:
289.23 Hz
FR Std. Dev.
What it is: Frequency Response Standard Deviation shows how accurately and balanced sound is captured by the microphone at each frequency. FR Std. Dev. is calculated between LFE and HFE, and the rest of the spectrum is ignored.
When it matters: A good frequency response is desired when a natural and neutral speech quality is desired. As opposed to HFE which is more a metric for speech intelligibility, frequency response could be considered as a metric for a natural and neutral sound.
Good value: >3.5dB
Noticeable difference: 0.5dB
:
3.5 dB
HFE
What it is: High-frequency extension is the highest frequency at which the frequency response reaches -3dB of the target response. It shows how extended the treble response of the microphone is.
When it matters: HFE is one the most important factors in speech intelligibility. The higher the HFE, the brighter, more open, and more extended the speech quality will be which makes it a lot easier to understand by the listener.
Good value: >8KHz
Noticeable difference: 1KHz
:
2313.87 Hz
Weighted THD
What it is: The unwanted frequencies (harmonics) produced alongside the intended frequencies, which cause deformation of an output signal compared to its input.
When it matters: When clean and pure sound reproduction is desired, though its effect is not as noticable as frequency response.
Good value: <1.5
Noticeable difference: 1.0
:
3.491
Gain
What it is: Shows how much louder the microphone can go above our reference loudness level. The gain value is reported relative to our reference level, which is 94dB at a distance of 5cm from the mouth.
When it matters: A microphone with a high gain is important when the input signal (speech) is very quiet. For example when whispering, or talking on the phone in a library.
Good value: >18dB
Noticeable difference: 3dB
:
44.09 dB
5.9 Noise Handling
What it is: How well the microphone is able to separate speech from background noise, so that the transmission would include more voice and less noise.
When it matters: When a clean and intelligible speech transmission is desired in a noisy situation like talking on the phone on a busy street or on the bus.
Score components:
SoundPeats Q9A SpNR
Speech + Pink Noise :
Speech + Subway Noise :
SpNR
What it is: Speech to Noise Ratio is the difference in level between speech and background noise as heard by the listener
When it matters: If the microphone is going to be used in a noisy environment, it is important for it to be able to separate the speech from background noise, so the voice would be easily audible and understandable.
Good value: >24dB
Noticeable difference: 3dB
:
10.26 dB
4.9

Active Features

What it is: Headphones with active components that require a battery. This includes noise cancelling and wireless headphones that actively reduce noise or transmit audio via a wireless connection.
When it matters: How suitable the power and wireless specifications of an active headphone will be, depending on your listening habits. The range and/or discharge time of the active headphone you select will be important if you're often on the move or have long uninterrupted listening sessions.
Score components:

The Q9A have a subpar battery life and no power saving features or a downloadable app to customize their sound. On the upside, they have a relatively fast wireless connection which should be good for audio streaming but might lag a little when watching movies or videos. 

5.5 Battery
What it is: The power source of your headphones. All headphones with active features have a battery that will deplete over time.
When it matters: To continue using the active features of your headphones. Some models lose features or switch off completely when the battery is drained, which limits what you can do with them until the next charge.
Battery Type
What it is: The type of battery that the headphones use. Usually AAA or embedded, Li-ion rechargeable batteries.
When it matters: When your headphones run out of power. Rechargeable batteries usually charge via the headphones Micro-USB port whereas AAA batteries have to be replaced or charged with an external device.
:
Rechargable
Battery Life
What it is: The amount of time it takes for a headphones' battery to be completely drained. Battery life will vary depending on the active features used and volume level.
When it matters: For active headphones that connect wirelessly, have noise cancellation or other audio-enhancing features, that cease to work once the battery is dead.
Good value: >10hrs
Noticeable difference: 0.5hrs
:
5.3 hrs
Charge Time
What it is: The amount of time your active headphones have to be connected to a power source to charge from 0 to a 100%. However, charging time will vary depending on your power source.
When it matters: To be able to use the active features of your headphones. Especially, wireless ones that completely switch off and need to be recharged when the battery is dead.
Good value: 2h or less
Noticeable difference: 0.25h
:
1.6 hrs
Power Saving Feature
What it is: A feature that turns off the headphones, after a set time, when they're not in use.
When it matters: To prolong battery life when the headphones are not being used, or if you forget to manually turn off your headphones.
:
No
Audio while charging
What it is: Some active headphones remain usable while charging. They continue to stream audio and do not disable other active features.
When it matters: This makes sure that your headphones's battery are not being drained when your relatively close to a power source. However, this means wireless headphones will need a wired connection to the power source during the charging process.
:
No
Passive Playback
What it is: Active headphones that still work when all their active features are turned off or out of power.
When it matters: If you run out of power and do not have spare AA/AAA batteries or access to a power source to recharge your headphones.
:
No

The Q9A have a subpar battery life of only 5.3 hours. They don't take too long to charge when connected to a power outlet but won't be the ideal headphones to take on long road trips or particularly lengthy flights. They also don't have any battery saving features, like an auto-off timer, so they will quickly run out of power if you forget to disconnect them from your device.

0 App Support
What it is: The additional app provided to enhance your listening experience. They typically deliver a set of practical features that give you more control over the sound, noise cancelling and effects that the headphones produce.
When it matters: An app with a lot of features allows you to customize your listening experience to suit your taste and preferences. For example, additions like an equalizer can give you more bass or treble and room effects can simulate a bigger Soundstage in closed back headphones.
Score components: Subjectively assigned
App Name : N/A
iOS : N/A
Android : N/A
Mac OS : N/A
Windows : N/A
Equalizer
What it is: Parametric, graphic or preset sound profiles that slightly alter the frequency response.
When it matters: If you want to tailor, your listening experience. Depending on what you're listening to you may want more or less bass for some tracks or more mid-range for vocals-heavy audio.
:
N/A
ANC control
What it is: Control over the Active noise canceling technology. This could be either a simple on/off button, and adjustable slider or even adaptive self-regulating noise cancellation.
When it matters: If you're in an environment where you need to monitor your surroundings or completely isolate yourself from ambient noise.
:
N/A
Mic Control : N/A
Room effects
What it is: Room effects that enhance the audio quality to make it more immersive.
When it matters: If you want to further tweak your listening experience. Adding room effects, can simulate a more spacious Soundstage or deliver a surround sound-like feel.
:
N/A
Playback control
What it is: An in-app player that gives you access to play/stop, track skipping or volume controls directly with the app.
When it matters: It's a shortcut that allows you to control your audio without leaving the application.
:
N/A
Button Mapping : N/A
Surround Sound : N/A

No compatible app.

3.5

Connectivity

What it is: The inputs and outputs of wired and wireless headphones, as well as their latency performance and range.
When it matters: To know how compatible your Bluetooth device, console or PC will be with your wired or wireless headset.
Score components:
  • 10% Bluetooth
  • 33% Wired
  • 10% Base/Dock
  • 22% Wireless Range
  • 25% Latency
6.0 Bluetooth
What it is: Bluetooth support for wireless headphones.
When it matters: To connect wirelessly to Bluetooth sources like your phone, tablet, console, PC and TV.
Score components:
  • 80% Multi-Device Pairing
  • 20% NFC
  • <1% PS4 Compatible
  • <1% Xbox One Compatible
Bluetooth Version : 4.1
Multi-Device Pairing
What it is: A Bluetooth profile that allows some headphones to be simultaneously connected to multiple Bluetooth sources, and have full call and media support on both/all devices they are connected to.
When it matters: To quickly switch between your Bluetooth sources. For example, switching from your phone to your home or work PC and still have call and media support on both devices.
Good value: 2 devices.
:
No
NFC
What it is: Near Field Communication technology that allows you to quickly, pair your headphones with your Bluetooth and NFC-enabled device.
When it matters: This makes pairing with an NFC-enabled device a lot easier than the typical and often tedious hold-to-pair procedure that most wireless headphones have.
Good value: Yes
:
No
PS4 Compatible
What it is: Bluetooth compatibility with the PlayStation 4.
When it matters: To connect your headphones wirelessly with your PS4.
Good value: Audio + Microphone
:
N/A
Xbox One Compatible
What it is: Bluetooth compatibility with the Xbox One.
When it matters: To connect your headphones wirelessly with your Xbox one.
Good value: Audio + Microphone
:
N/A
0 Wired
What it is: The type and compatibility of audio cables for wired and wireless headphones.
When it matters: For all devices with a regular audio jack (line-out) and also compatibility of the in-line remote/boom microphone with consoles and Personal computers.
Score components:
  • 13% Analog
  • 9% USB
  • 26% PS4 Compatible
  • 26% Xbox One Compatible
  • 26% PC Compatible
Cable Tested : N/A
Analog
What it is: A regular 1/8" TRS audio jack or a 1/4 or 1/16 TRS with a 1/8 TRS adapter.
When it matters: For all devices with a line out.
Good value: Yes
:
N/A
USB
What it is: A USB or USB adapter to connect to your devices for audio and microphone.
When it matters: A digital USB adapter usually offers a slight advantages over a regular audio jack, like a DAC, and amplifier module or software support and compatibility with PCs. However it may not be as compatible with consoles.
Good value: Yes
:
N/A
PS4 Compatible
What it is: PS4 compatibility with a regular 3 or 4 pin 1/8 TRS audio cable.
When it matters: When you want to use a wired headphone with your PS4
Good value: Audio + Microphone
:
N/A
Xbox One Compatible
What it is: Xbox One compatibility with a regular 3 or 4 pin 1/8 TRS audio cable.
When it matters: When you want to use a wired headphone with your Xbox One
Good value: Audio + Microphone
:
N/A
PC Compatible
What it is: PC compatibility with a regular 3 or 4 pin 1/8 TRS audio cable.
When it matters: When you want to use a wired headphone with your PC.
Good value: Audio + Microphone
:
N/A
0 Base/Dock
What it is: The base station, dock or dongle transmitter of wireless headphones that receive data/audio via a proprietary frequency range.
When it matters: Knowing the inputs and outputs of the base/dock/dongle as well as its compatibility with consoles and Personal Computers. Also whether the base supports dock charging to easily recharge the headphones without any cables.
Score components:
  • 5% Optical Input
  • 22% Line In
  • 5% Line Out
  • 22% USB Input
  • 4% RCA Input
  • 9% PS4 Compatible
  • 9% Xbox One Compatible
  • 9% PC Compatible
  • 2% Power Supply
  • 13% Dock Charging
Wireless Type
What it is: The type of wireless connection used by the base station/dock to communicate with the headphones.
When it matters: For latency and range. For example Radio frequency has low latency but mediocre range when obstructed and proprietary docks have their own 2.x GHz or 5 GHz frequency which varies in performance.
:
N/A
Optical Input
What it is: Optical input for audio.
When it matters: Optical can carry a bit more data at faster speeds than typical wired connection which allows for more high quality, lossless audio.
Good value: Yes
:
N/A
Line In
What it is: The regular wired input via a 1/8" TRS audio jack.
When it matters: For any device that has a line out for audio transmission.
Good value: Yes
:
N/A
Line Out
What it is: A regular 1/8TRS audio jack output.
When it matters: If you need to share the audio source with other devices. A line out lets you connect other headphones or speakers to the dock/base station.
Good value: Yes
:
N/A
USB Input
What it is: A digital USB input instead of a typical 1/8 TRS line-in.
When it matters: A USB connection can provide both an audio input and power to the Dock or Base station.
:
N/A
RCA Input
What it is: Audio input using via an RCA connectors.
When it matters: Provides better stereo audio to the dock/base that's then transmitted to the headphones.
Good value: Yes
:
N/A
PS4 Compatible
What it is: Dock/Base station compatibility with the PlayStation 4.
When it matters: To be able to use all the features of the dock/base station with out losing audio or microphone capability.
Good value: Audio + Microphone
:
N/A
Xbox One Compatible
What it is: Dock/Base station compatibility with the Xbox One.
When it matters: To be able to use all the features of the dock/base station with out losing audio or microphone capability.
:
N/A
PC Compatible
What it is: Dock/Base station compatibility with your Personal Computer.
When it matters: To be able to use all the features of the dock/base station with out losing audio or microphone capability.
Good value: Audio + Microphone
:
N/A
Power Supply
What it is: The connector type of the power source.
When it matters: The accessibility of the power source. For example a power supply with USB/USB-C connects to multiple devices, PC , PS4, Xbox One or even with your regular phone charger whereas a A/C adapter is less common.
Good value: USB/USB-C
:
N/A
Dock Charging
What it is: Charging the headphones via the dock/base station instead of a charging cable.
When it matters: It makes charging your headphones easier and gives you a sport to store your headphones when they are not in use.
Good value: Yes
:
N/A
7.0 Wireless Range
What it is: Headphones that offer a cable-free listening experience over a wireless network, typically via Bluetooth or radio frequency.
When it matters: If you don't want to be limited by the length of an audio cable. This means having the freedom to move around in your home or office with a much greater range than an audio cable could provide, especially, if the Bluetooth source is heavy or difficult to carry.
Score components:
Obstructed Range
What it is: The range that the wireless headphones can reach before dropping any audio when the Bluetooth source was placed in another room.
When it matters: If you can't or prefer not to carry your Bluetooth source on you, while listening to your audio in an indoor environment. Although, the obstructed wireless range will slightly depend on your home or office layout.
Good value: >35ft
Noticeable difference: 5ft
:
29 ft
Line of Sight Range
What it is: The range that the wireless headphones can reach before dropping any audio when in direct line of sight of the Bluetooth device.
When it matters: If you can't or prefer not to carry your Bluetooth source on you, while listening to your audio in a large and open environment.
Good value: 170ft or more
Noticeable difference: 10ft
:
60 ft

The Q9A have a below-average wireless range and only manage to deliver a stable connection under 30ft. This means they won't be the ideal headphones for heavily obstructed environments or large offices with a lot of walls. Their direct line of sight range is also not the best, and the hold to pair procedure can get a little tedious if you're often switching between Bluetooth devices.

5.1 Latency
What it is: How long it takes for audio to play through your headphones once the audio signal has been sent from a source.
When it matters: When gaming or watching movies. High latency means you will hear the audio much later than the images you see on screen.
Score components:
Default Latency
What it is: The Base RF latency or the default sub-band coding (SBC) of most Bluetooth headphones.
When it matters: When watching videos a high latency can cause sync issues between the images you see and the audio you hear.
Good value: 50ms or less
Noticeable difference: 15ms
:
145 ms
aptX Latency
What it is: An audio coding algorithm (Codec) that improves bit rate efficiency. It reduces latency and improves sound quality over Bluetooth.
When it matters: For better sound quality if your often streaming music over Bluetooth. Also it slightly improves latency when watching videos with wireless headphones.
Good value: 50ms or less
Noticeable difference: 15ms
:
112 ms
aptX(LL) Latency
What it is: Low latency variation of aptX that significantly reduces sync issues between video and sound when using Bluetooth headphones.
When it matters: When watching videos or gaming latency is a lot more noticeable than just listening to music.
Good value: 50ms or less
Noticeable difference: 5ms
:
N/A

In the box

SoundPeats Q9A In the box Picture

  • SoundPeats Q9A Headphones
  • Earbud tips (x3 sizes)
  • USB charging cable
  • Carrying case
  • Manual

Conclusion
SEE PRICE
Amazon.com

6.5Mixed Usage
What it is This is the combination of the different use cases to evaluate how versatile the headphones are. Therefore an everyday headphone should be well-rounded enough to adapt to most situations and environments without significant losses in sound quality, design ergonomics or isolation.
Score components:
The Q9A are decently versatile headphones that are best used for sports thanks to their stable, compact and wireless design. Unfortunately, their mediocre-at-best sound quality and poor noise isolation, means they won't be ideal for critical listeners or to use in loud, noisy environments.
6.4Critical Listening
What it is The level of audio fidelity a headphone can reproduce. Therefore a balanced and true representation of bass, mids, treble, soundstage and imaging, as well as a comfortable listening experience, is essential for critical listening.
Score components:
Subpar for critical listening. The small closed ear buds cannot create an adequate soundstage. That combined with their exceedingly bass-heavy audio reproduction makes them sound too dark and unbalanced for most listeners.
6.6Commute/Travel
What it is How well the headphones handle the loud environments involved in commuting or traveling. Therefore your listening experience should be comfortable, hassle-free and as isolated from noise as possible.
Score components:
Decent for commuting. They're easy-to-carry around and the low leakage can compensate for the poor noise isolation by playing your audio at higher volumes. However, they don't block much noise and shouldn't be your first choice for loud, noisy commutes.
7.6Sports/Fitness
What it is How well-adapted the headphones are, to use while doing sports or strenuous exercise. Therefore the headphones should not be too cumbersome and deliver a stable and comfortable listening experience.
Score components:
Good for sports. The stable ear-hook design and compact, portable size makes them suitable to use while running or exercising. They're also wireless and a bit more comfortable than some other in-ear headphones.
6.6Office
What it is How well the headphones can deliver a comfortable and isolated listening experience in an office-like environment. They should not leak much and should block the noise of a busy office.
Score components:
Above-average for office use. They will let a bit of the office chatter seep into your audio due to their poor isolation. However, they don't leak much and won't be audible to anyone around you.
5.4Home Theater
Score components:
Average for home theater use. They're comfortable but have fairly high latency which won't be ideal for watching movies.

Discussions

Log In

Register

Subscribe to emails:

Create Discussion

Preview Back to editor Format guide

The editor uses special characters (aka. markdown).

To post formatted content follow these rules:

What you typeWhat it will look like
*italic text*italic text
**bold text**bold text
[link](http://rtings.com)link
> quoted text
quoted text
# header

header

- item 1
- item 2
- item 3
  • item 1
  • item 2
  • item 3

* Quotes and lists must be followed by a blank line