LG UJ6300 Calibration Settings

For additional settings information, please consult the Common Problems and How to Calibrate pages.

Here are the following settings we've used for the calibration of the LG 43" UJ6300 (43UJ6300 ), and these should also work for the 49" variant (49UJ6300), the 55" variant (55UJ6300 ) and the 65" variant (65UJ6300 ). These work with everything except for gaming which requires some minor changes, which we list below.

General settings

The first thing we did was to select the 'IFS Expert (Dark Room) since it was the picture mode that gave us the closest result to our calibration goal. We set the 'Aspect Ratio Settings' to '16:9' since we did not want our input to be stretched in any way. You could change it to a mode that stretches the original content to fill up the screen completely if you are watching some lower resolution content. We then turned 'Off' the 'Energy Saving' mode, so that the TV would remain the same no matter how bright the room is. Finally, the 'Eye Comfort Mode' was left off, since we do not want the color temperature of the TV to change by itself depending on the content played.

For review purposes and in our completely dark room, we adjusted 'Backlight' to 52 to reach our desired luminance of 100 cd/m². You should adjust it to match your room environment. For a brighter room, this will need to be increased. Note that this does not affect the color accuracy, only the luminance of the display. We then set the 'Contrast' to 90 and found that the TV will clip past this value. We left 'Brightness' to 50, its default value. Both the 'H Sharpness' and 'V Sharpness' were set to 0 since we did not want to add any oversharpness.

We left 'Color' to 50 and 'Tint' to 0, their default values.

In the 'Expert Controls' settings page, we turned off 'Dynamic contrast', 'Super Resolution', 'Edge Enhancer' and 'Color Filter'. We then set the 'Color Gamut' to 'Auto' since when set to 'Auto' the TV will set the 'Color Gamut' automatically to match the video source. The gamma was changed to 2.2, since it is the gamma that we aim for during calibration.

In the 'White Balance' settings, we selected 'Warm2' from the 'Color Temperature' settings since it is closest to our calibration goal.

In the 'Picture Options' menu, we turned off 'Noise Reduction' and 'MPEG Noise Reduction', but you can turn on these on if you are watching older low-resolution content, as it may help reduce visual noise and compression artifacts. We set the 'Black Level' to 'Low' to match our source 'Output Dynamic Range'. When set wrong, blacks will look much more grayish or may be crushed. We left 'Motion Eye Care' off since we did not want the TV to change brightness automatically depending on the displayed scene. The 'Real Cinema' option should be turned on if you are watching a 24p movie via a DVD or Blu-ray player in order to have a judder-free movie.

The 'TruMotion setting is related to the motion interpolation and if you like the soap opera effect, you can set the setting to 'User' and adjust the slider to add the level of desired soap opera effect. Note that since this TV has only a 60Hz panel, the level of SOE is more limited than on a 120Hz TV.

HDR settings

First thing to do is to turn on 'HDMI ULTRA HD Deep Color' for the HDMI port where you intend to connect your HDR UHD Blu-ray player (or video games console if you are using it as a Blu-ray player), as some players may not detect that the TV can support the full HDMI bandwidth necessary for HDR content.

When the TV detects HDR content, it will give you 5 'HDR Picture Mode' options. For movies, the 'Cinema' picture mode is the best option available since it will give you more control of the settings, similar to what you have access with 'IFS Expert (Dark Room)' with SDR content.

SDR and HDR Gaming settings

To get the best input lag possible when gaming whether you are in SDR or HDR, you need to set the 'Picture Mode' to 'Game'.

Once the 'Game' picture mode is selected, some options won't be available in the setting pages since the 'Game' picture mode disables most of the image processing to give better input lag. Under game mode, the color temperature setting is now a slider giving you a difference control from colder to warmer. The gamma selection is also a bit different, giving you the option from 'Low' to 'High2'. In both cases, adjust these to your preference. For the rest of the available settings, you can follow our general settings. Note that 'Game' mode in HDR may appear dark. If so, you can enable 'Dynamic Contrast' to bring out details.

Miscellaneous settings

If you want to activate the Chroma subsampling (4:4:4) on the UJ6300, you need to set the 'Input Label' to 'PC' (from the input menu) for the HDMI port where your device is connected and for high bandwidth signals, be sure that the 'HDMI ULTRA HD Deep Color' is also turned on. You can read more on the subject here.

White Balance Settings

The following are the results of the white balance and colorspace calibration on our unit. They are provided for reference, and should not be copied as the calibration values vary per individual unit even for the same model and same size as the TV we reviewed due to manufacturing tolerances. If you want to try them you will need to enter all values shown, as all of them are active at the same time. If you end up with worse picture quality, simply reset them to the default values.



Be part of the most informed community and take advantage of our advanced tools to find the best product for your needs.
Join our mailing list:
Become an insider

Gain early access to all tests results for new products

Early Access UI

Prices will now be listed directly in reviews and tables

product prices UI

Have 5 votes per product category to choose which product we’ll review next

Additional votes UI

Gain unlimited access to detailed test results in tools and results (no blurred results)

test table UI

Create Post