Sony A9G OLED Calibration Settings

The video demonstrates the settings for the Sony X900F. It is accurate for most of the A9G settings as well, but the interface may have changed slightly.
For additional settings information, please consult the Common Problems and How to Calibrate pages.

We used the following calibration settings to review the Sony 55" A9G (XBR55A9G), and we expect them to be valid for the 65" model (XBR65A9G) and 77" model (XBR77A9G). These settings should apply to most types of content, except for gaming or use as a PC monitor, which require a few additional changes, listed below.

General Settings

Eco Settings

One of the first things we did was disable all of the power saving modes, as we don't want the TV to adjust the image during testing. From the Picture menu, we also disabled Auto picture mode, and Light sensor, as we don't want the picture settings changing during calibration.


For SDR content, there are six preset picture modes. We recommend choosing the 'Custom' picture mode, as it is the most accurate one out of the box, and allows for the most customization. We recommend leaving the Contrast to '90', Gamma at '0', and the Black level at '50' and Peak luminance at 'High' For our calibration, Black adjust, and Adv. contrast enhancer were all disabled, but you should adjust these to your liking.

You should adjust the Brightness to your specific viewing conditions. Changing the brightness does not have any impact on the overall picture quality.


In the Clarity tab, we left Sharpness to the default value of '50,' which is the neutral setting. Reality Creation was left disabled, but you can enable it when watching lower resolution content, as it can help to improve the image quality. Random noise reduction, Digital noise reduction, and Smooth gradation were also left disabled, but they can help improve the image quality of low quality videos. We don't recommend leaving them enabled, as they can cause a loss of fine details in higher quality content.


HDR is automatically enabled for the native apps. When you start playing HDR content, a small HDR icon appears in the picture settings menu. Once you start playing HDR content, some of the settings change automatically, including the Brightness, which increases to 'Max.' We recommend leaving these settings to their default settings in HDR.

For HDR to work from external devices, the Enhanced Format option usually has to be enabled from the 'HDMI signal format' menu for the input you are using. Older devices may have compatibility issues if this option is left enabled, so it is recommended to only enable this setting for devices that require it.

How to make HDR Brighter


If you find HDR content too dim, set Brightness to 'Max'. Adv. contrast enhancer to 'High' and you will get a brighter picture as shown on the EOTF in the image on the side. If this is not enough you can push the Gamma slider up, or even set the Black level higher (not recommended).

Dolby Vision

The A9G supports Dolby Vision, from native apps and with most external devices. Some devices may require firmware upgrades in order to work with Sony's Dolby Vision firmware. As with normal HDR content, when you start playing Dolby Vision content, some settings change automatically. We recommend leaving these settings as-is, do not copy our SDR settings over. There are three Picture modes in Dolby Vision: 'Vivid,' 'Dolby Vision Bright,' and 'Dolby Vision Dark.' We recommend 'Dolby Vision Dark,' but the 'Bright' setting might be better if you have aren't watching in a completely dark room.

Motion Settings

Sony TVs usually feature great, highly customizable motion features, and the A9G is no exception. Although we disable most motion enhancing functions for most of our tests, you should adjust these to whatever looks best for you. Some settings, like motion interpolation settings, may need to be adjusted depending on the specific content you are watching.

Motion Interpolation

Although we usually leave these settings disabled during testing, you should adjust the settings in the Motion tab to your liking, as different people prefer different levels of motion interpolation. If you want to enable motion interpolation, set Motionflow to 'Custom,' and adjust the Smoothness slider. Most of these settings will need to be adjusted depending on the specific content you are watching.

The Clearness option adjusts the A9G's black frame insertion (BFI) feature. We recommend this setting if you want clear motion.

Judder Settings

The Sony A9G is able to remove judder from all sources, but some additional settings are required for some content. For a native 24p signal, like from a Blu-ray player, no additional motion settings are required. To remove judder from external 60p/60i sources, like a cable box, or for the native apps, set Motionflow to 'Custom,' set the Smoothness to 'Min', the Clearness to 'Low', and set CineMotion to 'Auto.'


From the base SDR and HDR settings, very few changes are required for a great gaming experience. When you start gaming, it is best to switch to the 'Game' Picture mode, in order to get the lowest input lag, and use the recommended settings for SDR or HDR. For HDR gaming, it is important to make sure that HDMI Enhanced Format is enabled for the input you are using.

PC Gaming

Unlike TVs from most other brands, no special settings are required for PC use on the A9G. Just make sure you are using either the 'Game,' or 'Graphics' Picture mode, and that HDMI Enhanced Format is enabled for the input you are using. Both of these modes offer excellent low input lag, and display Chroma 4:4:4 properly, so that text is displayed properly.

Other Settings

Netflix Calibrated Mode

Initially introduced with the 2018 Sony MASTER Series TVs, the Z9F and A9F, the A9G also features a Netflix Calibrated Mode. This Picture mode is only available when the native Netflix app is open. Enabling it automatically changes many settings, from picture settings to motion. Although we didn't notice any significant benefit to using Sony's Netflix Calibrated mode, if you choose to do so, we recommend leaving all settings as they are, except for Brightness, which should be adjusted to your viewing conditions.

Screen Settings

When watching lower resolution content, the upscaling method may need to be adjusted depending on the specific format. The screen position and aspect ratio can be adjusted from the Screen page on each input.

OLED Panel Settings

Although we don't expect this to be an issue for most people, burn-in is a possibility on the A9G. There are a few options you should be aware of though, to ensure you get the most out of your new TV.

The Pixel Shift setting, as the name describes, shifts the entire image a few pixels to one side, and gradually shifts it in a different direction over time. This helps reduce the effects of burn-in from very small elements, like fine lines in a game HUD. We recommend leaving this enabled, the screen shift is not very noticeable unless you are using the TV as a PC monitor.

The Panel Refresh menu allows you to manually run a complete pixel refresh cycle. When you select it in the menu, a recommendation by Sony appears and says "Use once a year or less to reduce straining your TV"

Sound Settings

The A9G supports eARC. In order to obtain eARC, you must set Speakers to 'Audio System', eARC mode to 'Auto', and Digital audio out to 'Auto 1'.

White Balance Settings

The following are the results of the white balance and colorspace calibration on our unit. They are provided for reference, and should not be copied as the calibration values vary per individual unit even for the same model and same size as the TV we reviewed due to manufacturing tolerances. If you want to try them you will need to enter all values shown, as all of them are active at the same time. If you end up with worse picture quality, simply reset them to the default values.



Be part of the most informed community and take advantage of our advanced tools to find the best product for your needs.
Join our mailing list:
Become an insider

Gain early access to all tests results for new products

Early Access UI

Prices will now be listed directly in reviews and tables

product prices UI

Have 5 votes per product category to choose which product we’ll review next

Additional votes UI

Gain unlimited access to detailed test results in tools and results (no blurred results)

test table UI

Create Post